Charging | Replacement | FAQ |
Turn the tank ON.
Set the ID of the controller to the tank’s ID.
Turn the controller ON.
To obtain the best control sensitivity, please point the controller to the direction of the tank.
If the tank is leaning left while moving forward, to trim the tank, please press
1) Lower part of the “ T1 ” button while the tank is moving forward OR
2) Upper part of the “ T2 ” button while the tank is moving forward until the tank with straight forward motion.
1) Lower part of the “ T1 ” button while the tank is moving forward OR
2) Upper part of the “ T2 ” button while the tank is moving forward until the tank with straight forward motion.
If the tank is leaning right while moving forward, to trim the tank, please press
1) Lower part of the “ T2 ” button while the tank is moving forward OR
2) Upper part of the “ T1 ” button while the tank is moving forward until the tank with straight forward motion.
1) Lower part of the “ T2 ” button while the tank is moving forward OR
2) Upper part of the “ T1 ” button while the tank is moving forward until the tank with straight forward motion.
Insert 4 AA Batteries into the controller.
*We recommend using new or rechargeable batteries
*We recommend using new or rechargeable batteries
Turn the tank OFF.
Open the CHARGE cover and pull out the charging plug.
Fasten the tank to the controller, please insert the charging plug into the charging hole of the tank.
Turn the controller ON.
When the tank is charging, the controller
LED will light up. LED light off when the
tank is fully charged up.
LED will light up. LED light off when the
tank is fully charged up.
